Rockwell Automation MinPak Plus DC Drive Reversing Contactor Kit NRG, 14C217, 14C218 User Manual

Product description

Reliance and MinPak are trademarks of Rockwell Automation.

Reversing Contactor Kit

for Non-Regenerative MinPak Plus DC Drives

Model Numbers 14C217 and 14C218

Instruction Manual D2-3377

Product Description

Installation of the Reversing Contactor enables a single-phase, non-regenerative MinPak™ Plus DC drive to
provide both forward and reverse motor control. The standard factory-shipped drive offers unidirectional motor
control only.

When the Reversing Contactor is installed, the drive’s M-contactor is the forward contactor. Motor direction is
manually selected using the forward/reverse switch on the local or remote operator’s control station. Refer to
your MinPak Plus DC drive instruction manual for information on the operator’s control station.

The Reversing Contactor kit and drive horsepower rating must be compatible. Refer to table 1.

The Reversing Contactor is pre-assembled. All of the necessary jumper wires and mounting hardware are
included with the kit. The contents of the kit are listed in table 2.

ATTENTION: Only qualified electrical personnel familiar with the construction and operation of
this equipment and the hazards involved should install, adjust, operate, and/or service this
equipment. Read and understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in severe bodily injury or loss
of life.

Table 1 – Reversing Contactor and Drive Horsepower Compatibility

Drive Model Number

Drive Horsepower

Kit Model Number

14C10, 14C20, 14C11, 14C21, 14C12, 14C22

1/4 to 3

14C217

14C13, 14C23

14C218

Table 2 – Contents of the Reversing Contactor Kit

Description

Quantity

Part Number

M/N14C217

M/N14C218

Reversing Contactor

69326-26R

69326-25R

Wire Harness 45/47

700867-67S

700867-67V

Wire Harness A1/A2

700867-67R

700867-67T

5-wire Control Harness with Connector

700867-63R

Mounting Screw, 8-32 x 3/16

601741-62C

Instruction Manual

D2-3377