Rockwell Automation T823X Trusted Power System - Manual

SDS-823X
Trusted
TM Industrial Control System
Trusted TM Power system-T823X
Issue 3 Jan 2006
DESCRIPTION
The Trusted
TM Power System is a high density flexible power supply
designed to convert main line voltages of either 110V/240Vac. Outputs are
either 24Vdc for Trusted
TM product or 24-28Vdc adjustable field power.
The power supply system consists of a 1U Power Shelf with mechanical
support, containing up to three 750W Power Packs. The Power Packs load
share in configurations using 1 or more Power Shelf. Each Power Pack has
an individual supply connection via a mechanically retained IEC320 type
connector. Each Power Shelf can supply 2250Watts of power or 1500Watts
with n+1 redundancy from a single source. Multiple units can be connected
for further capacity or redundancy requirements.
Diagnostics information of Power Pack status is provided via the Power Port,
which connects to the rear of the Power Shelf. This device monitors input
and output conditions and reports out of range faults and over
temperature/fan failure using relay contacts. The Power Port also allows
connection of the optional rack mounted Power Controller for live
configuration of output voltage and current, monitoring up to 12 Power
Packs in 4 Power Shelves.
Product No. Product name Description
T8230 Power Shelf 19” x 1U chassis for up to 3 Power Packs.
Includes 4U fixing kit, Power Port and
mains plugs.
T8231 Power Pack 24Vdc 750Watt, universal input, 24Vdc out.
T8232 Power Pack 28Vdc 750Watt, universal input, 28Vdc out.
T8233 Power Port Plug in diagnostic interface.
T8234 Power Controller For live adjustment of output voltage.
19”x1U
T8235 Power Shield Covers unused Power Pack positions
TC323 Power Shelf Interconnect Ribbon cable for power sharing between
2-4 Power Shelves and connection to
Power Controller
FEATURES
Redundant and N+1
configurations
Hot replaceable power
Packs
Current sharing
Current limiting
Power factor correction
Diagnostics contacts
Configurable output voltage
Input/output fail
diagnostics per power pack