Rockwell Automation 2755 Atomscan Bar Code Scanner - Manual (Page 10)

Chapter 2
AtomScan Product Family
2–4
AtomScan scanners require an adapter and a cable to connect with an
Enhanced Decoder.
The scanners are compatible with these Allen-Bradley bar code decoders:
•
Catalog No. 2755-DS1A Enhanced Single-Head Decoder
•
Catalog No. 2755-DD1A Enhanced Dual-Head Decoder
The gasketed enclosure is equipped with a NEMA Type 1 connector, so it is
suitable for a wide range of applications.
An AtomScan scanner is often mounted by driving screws up through holes
in the mounting surface. If this is impractical, the mounting plate may be
used for top-side mounting.
Catalog Number Accessories
2755-CS10 Cable, Scanner to Adapter, 10 feet (3 meters)
2755-CS15 Cable, Scanner to Adapter, 15 feet (4.6 meters)
2755-CP13 Package Detect Extension Cable, 13 ft. (4 meters)
2755-NC18 Adapter Cable to Decoder
2755-NM7 Mounting Plate for Top Mounting
2755-DS1A or -DD1A Decoder (Single Scanner or Dual Scanner)
Figure 2.4
Back of Scanner
Micro-Change Connector
To the Photoelectric Sensor
RJ-45 Connector
To the AtomScan
Scanner
Connector
to Decoder
Cable
2755-CS1x
Adapter Connections
Adapter AtomScan Scanner
Accessories