Rockwell Automation 2364P Fiber Optic Cable - Manual

Publication 2364P-5.11 March 2000
Installation Instructions
Fiber Optic Cable Installation
For 2364P Parallel Configurations
Contents This document shows how to install the RGU-to-RGU (R2R) fiber optic
cable in a parallel configuration.
What This Kit Contains Using the table below, verify that you have received the appropriate items in
your kit:
Fiber optic cables are available in three different lengths. 26 foot (7.92 m)
cables are used for most connections. The 6 foot (1.83 m) and 34 foot
(10.36 m) cables are used when connecting to an R2R hub board (see
Figure 3). Verify that you have the appropriate cable for your configuration.
Figure 1
Cable Lengths Available
Other Items Needed Before you begin, be sure you also have the following:
•
Tools and items you will need for:
– Measuring voltages
– Securing wires (tie wraps)
•
Documentation:
– Your drive system schematics
– Publication 2364P-5.01, Parallel Configuration–User Manual
For this part: You should receive this quantity:
fiber optic cable 1
6 foot (1.83m) Cable
26 foot (7.92m) Cable
34 foot (10.36m) Cable