Rockwell Automation 6181 CPU Upgrade for 6181 Industrial Computers - Manual (Page 2)

Publication 6181-IN003B-EN-P - January 2004
2 Upgrading CPU Board
Installing the Intel 82815 Graphics Controller Driver
1. Insert Accessory CD into CD-ROM drive.
2. When prompted by the Found New Hardware wizard, select
Search for a suitable driver (recommended).
3. Deselect floppy disk and CD-ROM drives and select Specify a
location.
4. Browse to the Accessory CD.
The driver is currently on the Accessory CD at the location
below, but the exact location on the CD may change as revisions
are made. This latest driver can also be found at the
http://support.rockwellautomation.com website.
{CD-ROM}:\6181\Drivers\2_Video\2_AGP (Intel 815
GMCH)\Win 2K, XP\Win2000
5. Open i81xnt5.inf file and click OK.
Install will prompt for the location of the i81xnt5.sys file. Point
to the same directory as above.
6. Select i81xnt5.sys file and click OK
7. Select Finish.
Setting the Display Resolution
1. Open the Display Properties, Settings window.
2. Set Screen Area to corresponding screen size.
3. Set Colors to High Color (16 bit) or True Color (24 bit) as
desired.
4. Select Apply. Display will adjust accordingly when the Apply
button is pressed.
5. Click OK to close Display Properties window.
Screen Size Screen Area
10.4” 640 x 480
12.1” 800 x 600
NDM desired resolution for attached monitor