Rockwell Automation 9220-KTCT INSTL.INSTR CONTROLNET ISA/EISA - Manual (Page 11)

ControlNet ISA/EISA Bus Tool Installation Instructions 11
9220-5.1 — November 1996
1. Remove the 9220-KTCT from its static-shielded bag.
If you are Then
using the card’s default
memory address setting go to step 3.
setting a new base
memory address set the switches to either up or down to reflect the selected
address from Worksheet C, on page 6.
up (1)
down (0)
1 2 1 2 3 4
D000:0000
Factory-set address
(recommended setting)
Front of Switches
up (1)
down (0)
Side View Front View
S2 S1
If you are Then
using the card’s default base
I/O space address setting go to page 13.
setting a new base I/O
space address set the switches to either up or down to reflect the selected
address from Worksheet E, on page 9.
220h
Factory-set address
(recommended setting)
Front of Switches
up (1)
down (0)
Side View Front View
1 2 3 4
up (1)
down (0)
S3
2.
3.