Identification, Storage, Installation – Rockwell Automation MV SMC Flex OEM Components - Fiber Optic Multiplexer Board User Manual
Page 2: Additional publications
2
Fiber Optic Multiplexer Board – Instruction Sheet
Identification
Verify the catalog number of the fiber optic multiplexer board.
Table 1 – Fiber Optic Multiplexer Board Catalog Number
Storage
If the interface board will not be installed immediately after receipt,
store it in a clean, dry and dust-free environment. Humidity should
not exceed 95%, non-condensing.
Installation
Refer
to
MV SMC OEM Components – Bulletin 7703E,
Installation Instructions (Publication 7703E-IN001_-EN-P) for
complete installation instructions of the Interface Board.
Additional Publications
To order additional copies of Instruction Manuals for all Rockwell
Automation medium voltage products, please contact a Rockwell
Automation sales office or your local distributor.
Medium Voltage Products, 135 Dundas Street, Cambridge, ON, N1R 5X1 Canada, Tel: (1) 519.740.4100, Fax: (1) 519.623.8930, www.ab.com/mvb
Publication 7703E-IN008A-EN-P – May 2008
Copyright © 2008 Rockwell Automation, Inc. All rights reserved. Printed in Canada.
System Voltage
Control Circuit Voltage
and Frequency
Catalog Number
10 – 15 kV
110/120 to 220/240 VAC
50/60 Hz
7703E-MUXB