Rockwell Automation 8510SA-TP Termination Panels Instructions - Manual (Page 2)

8510 Termination Panels
Instructions
panel. Complete termination panel dimensions are shown in Figure
3.13 of the 8510 User Manual (publication 8510-5.1).
2. Snap the termination panels onto the mounting rail. Connect the cable
to the termination panel and to the corresponding numbered connector
on the 8510 drive.
3. Refer to Chapter 8 of the 8510 User Manual for the terminal
assignments for each interface signal.
4. The terminal blocks used on the termination panels are a compression
type suitable for bare, stripped wire. Terminals will accept #16 AWG
(1.5 mm
2 ) wire or smaller. To insert a wire, release the compression
lock by firmly pressing a narrow blade screwdriver into the slot on the
back of the terminal (see figure below). Insert the wire and release the
compression lock by removing the screwdriver.
Figure 1
Termination Panel Terminal Block
1
Insert Narrow Blade Screwdriver
in Rear Slot to Release Lock
Insert Bare,
Stripped Wire
Publication 8510-5.6 – April, 1993 P/N 152833
Copyright 1993 Allen-Bradley Company, Inc. Printed in USA
WORLD
HEADQUARTERS
Allen-Bradley
1201 South Second Street
Milwaukee, WI 53204
USA
Tel: (1) 414 382-2000
Telex: 43 11 016
Fax: (1) 414 382-4444 EUROPE/MIDDLE
EAST/
AFRICA
HEADQUARTERS
Allen-Bradley Europe
B.V.
Amsterdamseweg 15
1422 AC Uithoorn
The Netherlands
Tel: (31) 2975/43500
Telex: (844) 18042
Fax: (31) 2975/60222 LATIN AMERICA
HEADQUARTERS
Allen-Bradley
1201 South Second
Street
Milwaukee, WI 53204
USA
Tel: (1) 414 382-2000
Telex: 43 11 016
Fax: (1) 414 382-2400 ASIA/PACIFIC
HEADQUARTERS
Allen-Bradley (Hong Kong)
Limited
Room 1006, Block B, Sea View
Estate
2-8 Watson Road
Hong Kong
Tel: (852) 887-4788
Telex: (780) 64347
Fax: (852) 510-9436 CANADA
HEADQUARTERS
Allen-Bradley Canada
Limited
135 Dundas Street
Cambridge, Ontario N1R
5X1
Canada
Tel: (1) 519 623-1810
Fax: (1) 519 623-8930
With offices in major cities worldwide.
Allen-Bradley has been helping its customers improve productivity and quality for 90 years.
Allen-Bradley designs, manufactures and supports a broad range of control and automation
products worldwide. They include logic processors, power and motion control devices,
man-machine interfaces and sensors. Allen-Bradley is a subsidiary of Rockwell
International, one of the world’s leading technology companies.