Insert the card – Rockwell Automation 9904-PCIC ControlNet 9904-PCIC Communications Card I.I. User Manual

Page 6

ControlNet PCI Communication Interface Card

9904-IN002A-US-P - March 2000

Insert the Card

To insert the card inside the computer:

1. Follow the card handling instructions on page 4.

2. Insert the card into the edge connector and tighten the expansion slot

screw.

3. Turn on the computer to be certain that it comes up correctly.

4. Replace the computer’s cover (when the computer boots up correctly).

If the computer:

then:

powers up

go to step 4

hangs up

•

you probably have a memory or I/O conflict

•

you should remove all other cards and try again

If you continue to experience difficulty, contact a
representative where you purchased this product.