Rockwell Automation MV SMC Flex OEM Components - Fiber Optic Cables - Manual

MV SMC OEM Components
Fiber Optic Cables – Instruction Sheet
A T T E N T I O N A T T E N T I O N Avoid sharply bending or striking the fiber optic
cables when handling them. Damaging the cables
may result in signal loss to the components and
improper functioning of the unit.
Carefully unpack the item and inspect it for damage that may have
occurred during shipping. Immediately report any damage to the
claims office of the carrier. Rockwell Automation will render
reasonable assistance in resolving a damage claim.
Identification
Verify the catalog number of the fiber optic cables.
Table 1 – Fiber Optic Cable Options and Catalog Numbers
Cable Length System Voltage (kV) Quantity Catalog Number (set)
10 – 12 kV 33 7703E-25FO30
2.5 m (8.2 ft.)
12.2 – 14.4 kV 39 7703E-25FO36
10 – 12 kV 33 7703E-50FO30
5.0 m (16.4 ft.)
12.1 – 14.4 39 7703E-50FO36
Storage
If the cables will not be installed immediately after receipt, store
them in a clean, dry and dust-free environment. Humidity should not
exceed 95%, non-condensing.
Installation
Refer to MV SMC OEM Components – Bulletins 7703E, (10 – 15 kV)
Installation Instructions (Publication 7703E-IN001_-EN-P) for
complete installation instructions of the Fiber Optic Cables.
Handling
Fiber Optic Cables Fiber Optic Cables