Post-installation procedure, Additional resources – Rockwell Automation 6189V-512MDDR2 Memory Modules User Manual
Page 9
Memory Modules 9
Publication 6177R-IN003B-EN-P - November 2009
Post-installation Procedure
Perform this post-installation procedure after installing or removing a hardware component.
1. Make sure all components are installed according to the described step-by-step
instructions.
2. Make sure that no loose tools or parts are left inside the computer.
3. Reinstall any expansion boards, peripherals, board covers, and system cables that have
previously been removed.
4. Reinstall the side cover if necessary.
5. Connect all external cables and power to the computer.
6. Press the power switch to turn on the computer.
Additional Resources
For more information on the VersaView Light Industrial non-display computers, refer to the
user manual, publication 6177R-UM001.
You can download these publications and translated versions of the user manual and
installation instructions from the Web site