Rockwell Automation 2706 Dataliner 20 Message Display - Manual (Page 11)

Dataliner DL20 Message Display 11
Connecting AC Power
The table below shows the electrical ratings for the Dataliner DL20 display.
Type of Display Supply Voltage Power Consumption
One and Two Line 100-240V ac, 50/60 Hz 30 VA maximum
Four Line 100-240V ac, 50/60 Hz 45 VA maximum
!
ATTENTION: The Dataliner DL20 display is designed for safe use
when installed in a suitably rated NEMA Type 12, 13, 4X (indoor use
only), IP54 or IP65 enclosure.
!
ATTENTION : Do not apply power to the display until all wiring
connections have been made. Failure to do so may result in electrical
shock.
Wiring Guidelines (EU Installations Only)
10 cm (4 in.) Maxi-
mum
L1
To
Dataliner
AC Input
To
AC Mains
Supply L2N
L1
L2N
For installations within the European Union use the following guidelines to minimize
Radio Frequency Interference (RFI) and achieve maximum Electromagnetic
Compatibility (EMC).
•
Follow all local safety regulations regarding proper grounding.