Rockwell Automation 2706-P72_P74_P42_P44 Inview Display Firmware Upgrade - Manual (Page 6)

6 InView Firmware Update
Publication 2706-IN009C-EN-P - June 2008
2. For the chip carrier type, firmly pull down on the end tabs of the EPROM
and carefully pull it out of the socket.
3. For the round-pin DIP socket type, use a small screwdriver to pry the two
sockets apart.
.
4. Matching the side notches of the new EPROM to the socket, press the new
EPROM firmly into the socket.
5. Replace the end cover and screws and torque end cover screws to 2.7 N • m
(24 lb • in).
TIP
Note the location of the pin 1 identifier for reference while installing the new chip.
EPROM