Rockwell Automation 1797-TB3S FLEX Ex Terminal Base - Manual (Page 19)

FLEX Ex Terminal Base Units 19
Publication 1797-5.1 - June 2010
FM Certification
If these products have the FM mark, they have been designed, evaluated,
tested, and certified to meet the following standards:
 FM C1. No.3600:1998, Electrical Equipment for Use in Hazardous
(Classified) Locations General Requirements
 FM C1. No.3610:1999, Intrinsically Safe Apparatus and Associated
Apparatus for Use in Class I, II, III Division 1 Hazardous (Classified)
Locations
 FM C1. No.3615:1989, Explosionproof Electrical Equipment General
Requirements
 FM C1. No.3810:1989, 1995, Electrical and Electronic Test,
Measuring and Process Control Equipment
 ANSI/NEMA 250, 1991, Enclosures for Electrical Equipment
FLEX Ex is a trademark of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
IMPORTANT
For detailed certification information, refer to the FLEX
Ex System Certification Reference Manual, publication
1797-6.5.6.
WARNING Avoid electrostatic charging.
ADVERTÊNCIA! PREVENIR CONTRA O ACÚMULO
DE CARGA ELETROSTÁTICA.