Rockwell Automation 2100 CENTERLINE MCC Installing Unit Load Ground Lugs - Manual (Page 2)

Publication 2100-IN064A-EN-P—September 2006 2 Copyright © 2006 Rockwell Automation, Inc. Printed in the U.S.A.
Supersedes Publication 2400-5.3 - October 1990
Figure 1 Assembling unit load ground lug kit
4. The ground lugs accept #14 to #4 AWG copper wire. Remove 1/2” of
insulation from the end of the wire. Insert the stripped end of the wire
into the lug. Torque to 45 lb-in (5 N-m).
A
B
C
D
E
2.0
1.0
Ground Bus
5/16” Diameter Holes
Parts List:
A. Ground lugs (2)
B. 1/4-20 x 1” hex head
screw (1)
C. 1/4” flat washer (1)
D. 1/4” lock washer (1)
E. 1/4-20 nut (1)
Front