Rockwell Automation 1755-BAT Replacing the Battery in the GuardPLC 2000 Power Supply User Manual
Catalog number 1755-bat, Installation instructions

Installation Instructions
Replacing the Back-up Battery on the GuardPLC
2000 Power Supply
Catalog Number 1755-BAT
Handling Lithium Batteries
Preventing Electrostatic Discharge
Only qualified personnel with knowledge of ESD protective measures may replace
the back-up battery.
ATTENTION
For safety information on the handling and disposal of lithium batteries, see Guidelines
for Handling Lithium Batteries, publication
.
The 1755-BAT lithium battery, available from Rockwell Automation, is intended to be
replaced during the life of the product.
ATTENTION
This equipment is sensitive to electrostatic discharge, which can cause internal damage
and affect normal operation. Follow these guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved wrist grounding strap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in use.