Rockwell Automation 1751 SynchLink Base Block Installation Instructions User Manual

Page 5

Text mode
Original mode

SynchLink Base Block 5

Publication 1751-IN001A-EN-P - March 2001

2. Hook the lip of on the rear of the base block onto the top of the DIN rail

and rotate the base block onto the rail.

3. Press the base block down to the DIN rail until flush.

The locking tab should snap into position and lock the base block to the
DIN rail. If the tab does not snap into position, follow step 4. If the tab does
snap into position, proceed to step 5.

31203b-M

31203c-M