Rockwell Automation 1785-CHBM ControlNet Hot Backup Quick Start - Manual (Page 7)

7
Publication 1785-QS001A-EN-P - January 2001
European Union Directive Compliance
This product has the CE mark and is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2EMC - Generic Emission Standard,
Part 2 - Industrial Environment
•
EN 50082-2EMC - Generic Immunity Standard,
Part 2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 61131-2
Programmable Controllers, Part 2 - Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as these Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines for
Noise Immunity (publication 1770-4.1)
•
Guidelines for Handling Lithium Batteries (publication
1756-5.68)
•
Automation Systems Catalog
This equipment is classified as open equipment and must be
mounted in an enclosure during operation to provide safety
protection.