Rockwell Automation 1761-HHMK64 Hand-Held Programmer Memory Module - Manual (Page 2)

Installation Instructions
Hand-Held Programmer Memory
Module
2c
Installing the Memory Module
1.If the HHP is connected to the controller, remove the cable from the HHP or turn off power to the
controller.
3.Locate the memory module socket as shown below. Place the memory module onto the
socket and press firmly in place.
4.Replace the memory module door.
2.Remove the memory module door.
Back View
Memory module door
Memory module
Memory module socket
5.Reconnect the cable to the HHP, or restore power to the controller.
With offices in major cities worldwide
Publication 1761-5.2 October 1994 PN40072-018-01(A)
Copyright 2007 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.