European communities (ec) directive compliance, Emc directive, Low voltage directive – Rockwell Automation 1786-BNC2TNC ControlNet COAX BNC2TNC Adapter Installation Instructions User Manual
Page 3

ControlNet Coax BNC2TNC Adapter 3
Publication 1786-IN002A-US-P - May 2000
European Communities (EC) Directive Compliance
If this product has the CE mark it is approved for installation within the European
Union and EEA regions. It has been designed and tested to meet the following
directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC Electromagnetic
Compatibility (EMC) by applying the following standards, in whole or in part,
documented in a technical construction file:
•
EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial
Environment
•
EN 5001082-2 EMC — Generic Immunity Standard, Part 2 — Industrial
Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 -
Equipment Requirements and Tests.
For specific information required by EN 61131-2, see the appropriate section in the
following Allen-Bradley publications:
•
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
•
Automation Systems Catalog, publication B111
•
ControlNet Coax Planning and Installation Guide, publication 1786-6.2.1