Rockwell Automation 1756-ENET/B ControlLogix EtherNet Comm. Interface Module, Series B Installation Instructions - Manual (Page 16)

16 ControlLogix Ethernet Communication Interface Module
Publication 1756-IN053D-EN-P - June 2002
Specifications
Module Location Any slot in the ControlLogix chassis
Maximum Backplane
Current Load 900mA @ 5.1V dc
350mA @ 24V dc from I/O chassis backplane
Power Dissipation 13.3W maximum
Operating
Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0 to 60°C (32 to 140°F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating Thermal Shock):
–40 to 85°C (–40 to 185°F)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5 to 95% non-condensing
Shock IEC 60068-2-27 (Test Ea, Unpackaged Shock):
Operating 30g
Non-operating 50g
Vibration IEC 60068-2-6 (Test Fc, Operating):
5g @ 10-500Hz
Emissions CISPR 11:
Group 1, Class A
ESD Immunity IEC 61000-4-2:
6kV contact discharges
8kV air discharges
Radiated RF Immunity IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 30MHz to
1000MHz
10V/m with 200Hz 50% Pulse 100%AM at 900Mhz
EFT/B Immunity IEC 61000-4-4:
±2kV at 5kHz on communications ports
Surge Transient
Immunity IEC 61000-4-5:
+2kV line-earth (CM) on shielded ports
Conducted RF
Immunity IEC 61000-4-6:
10Vrms with 1kHz sine-wave 80%AM from 150kHz to
80MHz