Rockwell Automation 1762-OB16 Solid State 24V dc Source Output Module - Manual (Page 10)

10 Solid State 24V DC Source Output Module
Publication 1762-IN011B-EN-P - June 2013
Wire Size and Terminal Screw Torque
Each terminal accepts up to two wires with the following restrictions:
I/O Memory Mapping
Output Data File
For each output module, the output data file contains the controller-directed state of the discrete
output points. Bit positions 0…15 correspond to output terminals 0…15.
w = write only
Addressing
The addressing scheme for 1762 Expansion I/O is shown below.
(1) I/O located on the controller (embedded I/O) is slot 0. I/O added to the controller (expansion I/O) begins with
slot 1.
Wire Type Wire Size Terminal Screw Torque
Solid Cu-90 °C (194 °F) #14…22 AWG 0.90 Nm (8 lb-in.)
Stranded Cu-90 °C (194 °F) #16…22 AWG 0.90 Nm (8 lb-in.)
Wo
rd
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 w w w w w w w w w w w w w w w w
O0:x.0/0
Output
Data File
Slot Number (1)
Word (always zero for this module)
Bit (0…15)
Bit Delimiter
Word Delimiter
Slot Delimiter