Rockwell Automation 1738-FPD ArmorPoint I/O Field Potential Distributor, Series A - Manual (Page 8)

Publication 1738-IN019A-EN-E - June 2004
8 ArmorPoint I/O Field Potential Distributor, Series A
Specifications Following are specifications for the 1738 ArmorPoint FPD.
1738-FPD Field Potential Distributor
Inputs Voltage Rating
12V dc, 24V dc nominal
10-28.8V dc range
120V ac, 240V ac nominal
Input Current 10A maximum
Operating Voltage 12/24V dc, 120/240V ac
Backplane Output Current Pass Through
Keyswitch Position 8
General Specifications
Indicators
None
PointBus Current Pass Through
Power Consumption None
Power Dissipation None
Thermal Dissipation None
Isolation Voltage
(continuous-voltage withstand rating)
50V rms, 120V rms/240V rms
Tested at 1528V ac rms for 60s
Field Power Bus
Supply Voltage
Supply Current
264V ac maximum,
12V dc, 24V dc, 10-28.8V dc range
120V ac, 240V ac, 50/60 Hz
10A maximum
Dimensions Inches (Metric) 1.25H x 2.63W x 4.25D (31.75H x 66.80W x 107.95D)
Operating Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20 to 60°C (-4 to 140°F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
-40 to 85°C (-40 to 185°F)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5-95% non-condensing
Shock IEC60068-2-27 (Test Ea, Unpackaged Shock):
Operating 30g
Non-operating 50g
Vibration IEC60068-2-6 (Test Fc, Operating):
5g @ 10-500Hz
ESD Immunity IEC 61000-4-2:
6kV contact discharges
8kV air discharges
Radiated RF Immunity IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 30MHz to 2000MHz
10V/m with 200Hz 50% Pulse 100%AM at 900Mhz
10V/m with 200Hz 50% Pulse 100%AM at 1890Mhz
EFT/B Immunity IEC 61000-4-4:
±4kV at 5kHz on power ports
Surge Transient Immunity IEC 61000-4-5:
±1kV line-line(DM) and ±2kV line-earth(CM) on power ports