Rockwell Automation 1771-IL INSTL.INSTR.ISOL ANALOG INPUT - Manual

Publication 1771Ć5.51 - October 1996
Isolated Analog Input
Module
(Catalog Number 1771-IL Series C)
Use this document as a guide when installing the catalog number
1771-IL/C analog input module.
To See page
Prevent Electrostatic Discharge Below
Understand Compliance to European Union Directives 2
Understand Product Compatibility
3
Calculate Power Requirements 3
Determine Module Placement 3
Set the Configuration Jumpers 4
Key the Backplane Connector 4
Install the Module and Field Wiring Arm 5
Connect Wiring to the Field Wiring Arm 6
Ground the Chassis and Module 7
Configure the Module 8
For this reference information See page
Status Indicators 10
Troubleshooting 11
Specifications 13
The isolated analog input module is sensitive to electrostatic
discharge.
!
ATTENTION: Electrostatic discharge can damage
integrated circuits or semiconductors if you touch
backplane connector pins. Follow these guidelines
when you handle the module:
•
Touch a grounded object to discharge static potential
•
Wear an approved wrist-strap grounding device
•
Do not touch the backplane connector or
connector pins
•
Do not touch circuit components inside the module
•
If available, use a static-safe work station
•
When not in use, keep the module in its
static-shield bag
This icon is used when
additional information is
available in the Isolated Analog
Input Module User Manual,
publication 1771Ć6.5.91.
If you need a copy of this
manual, fax the enclosed User
Manual Request Card to
1Ć800Ć576Ć6340. If you are
outside the U.S., fax the card to
1Ć330Ć723Ć4036.
Installation Instructions
Contents
Prevent Electrostatic
Discharge