Rockwell Automation 1756-EN2F ControlLogix EtherNet/IP Module Installation Instructions User Manual
Controllogix ethernet/ip module, Installation instructions, About this publication
Installation Instructions
ControlLogix EtherNet/IP Module
Catalog Number 1756-EN2F
About This Publication
Use this publication as a guide to install the ControlLogix EtherNet/IP Fiber
Module.
Topic
Page
Determine Module Slot Location
Connect the Module to the EtherNet/IP Network
Program the Module via the USB Port
Check Power Supply and Module Status
Install or Remove the Module Under Power
Table of contents
Document Outline
- 1756-IN606B-EN-P, ControlLogix EtherNet/IP Module Installation Instructions
- About This Publication
- Important User Information
- North American Hazardous Location Approval
- Environment and Enclosure
- About the Module
- Before You Begin
- Determine Module Slot Location
- Install the Module
- Connect the Module to the EtherNet/IP Network
- Program the Module via the USB Port
- Configure the Module
- Apply Chassis Power
- Check Power Supply and Module Status
- Install or Remove the Module Under Power
- Interpret the Status Indicators
- Specifications
- Additional Resources
- Back Cover