Rockwell Automation 1756-DHRIO ControlLogix Data Highway Plus-Remote I/O Communication Interface Module I.I. User Manual
Installation instructions, Catalog number 1756-dhrio/e
Installation Instructions
ControlLogix Data Highway Plus-Remote I/O
Communication Interface Module
Catalog Number 1756-DHRIO/E
Topic
Page
About the ControlLogix Data Highway Remote I/O Communication
Interface Module
Prepare the Chassis for Module Installation
Set the Network Type and Node Address Switches
Determine Module Slot Location
9
Install or Remove the Module While Power Is Applied
Remove or Replace the Module (When Applicable)
Wire the Connectors for the Module Channels
Connect the Programming Terminal and DH+ or Remote I/O Network
13
Apply Chassis Power
13
Interpret the Alphanumeric Display
Table of contents
Document Outline
- 1756-IN003D-EN-P, ControlLogix Data Highway Plus-Remote I/O Communication Interface Module Installation Instructions
- Important User Information
- North American Hazardous Location Approval
- About the ControlLogix Data Highway Remote I/O Communication Interface Module
- Set the Network Type and Node Address Switches
- Prepare the Chassis for Module Installation
- Troubleshoot the Power Supply
- Interpret the Alphanumeric Display
- Configure Your 1756-DHRIO Module
- Additional Resources
- Back Cover