Rockwell Automation 1734-PDN/B Point I/O DeviceNet Communication Interface - Manual (Page 19)

POINT I/O DeviceNet Communication Interface Module 19
Publication 1734-IN057D-EN-P - April 2005
Certification
2
(when product is marked)
c-UL-us UL Listed Industrial Control Equipment,
certified for U.S. and Canada
c-UL-us UL Listed for Class I, Division 2, Group A,B,C,D
Hazardous Locations, certified for U.S. and Canada
CE European Union 89/336/EEC EMC Directive,
compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial
Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
European Union 72/23/EEC LVD Directive,
compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act,
compliant with:
AS/NZS CISPR11; Industrial Emissions
EE
X
European Union 94/9/EC ATEX Directive,
compliant with:
EN 50021; Potentially Explosive Atmospheres,
Protection “n” (Zone 2)
when used at or below 60V ac or 75V dc
ODVA ODVA conformance tested to DeviceNet
specifications
1 Use this Conductor Category information for planning conductor routing. Refer to Refer to publication
1770-4.1, Industrial Automation Wiring and Grounding Guidelines.
2 See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and
other certification details.
POINT I/O and POINTBus are trademarks of Rockwell Automation.
DeviceNet is a trademark of the Open DeviceNet Vendor Association.