Rockwell Automation 1336S DC Bus Fuse Replacement - Manual

Instructions
This publication will guide you through replacement of the DC bus
fuse assembly on D Frame 1336 PLUS AC Drives.
Use the table below to verify that the correct Fuse Kit was received.
Each kit consists of the following components:
Drive Catalog
Number Fuse Kit
Catalog Number Fuse Rating
(Amperes)
1336S-A040 1336-CONV-SP15A 250
1336S-A050 1336-CONV-SP16A 300
1336S-A060 1336-CONV-SP17A 350
1336S-B060 1336-CONV-SP14A 200
1336S-B075 1336-CONV-SP15A 250
1336S-B100 1336-CONV-SP16A 300
1336S-B125 1336-CONV-SP17A 350
1336S-BX150 1336-CONV-SP17A 350
1336S-C075 1336-CONV-SP14A 200
1336S-C100 1336-CONV-SP15A 250
1336S-C125 1336-CONV-SP16A 300
Component Description Quantity
Bus Bar, Upper & Lower 1 each
Diode with Lead, Lug & Screw 1 each
Fuse 1
Screw Assembly with Washer & Lockwasher 2
Nut/Washer
2
Flat Washer 2
Label 1
Insulating Paper 1
!
ATTENTION: This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing
or repairing this assembly. Component damage may result
if ESD control procedures are not followed. If you are not
familiar with static control procedures, reference
publication 8000-4.5.2, “Guarding Against Electrostatic
Damage” or any other applicable ESD protection handbook.
!
ATTENTION: To avoid a shock hazard, assure that all
power to the drive has been removed before proceeding. In
addition, verify that the DC bus has discharged by
measuring across the “+DC” and “–DC” terminals of TB1
with a voltmeter. The voltage should be 0.0VDC.
1336 PLUS Adjustable Frequency AC Drive
DC Bus Fuse Replacement
D Frame Drives