Rockwell Automation 1485P KwikLink Lite, 5-Pin Insulated Displacement Connector - Manual (Page 2)

2
Wiring Procedure
1. Cutting the Cable
S Cut cables perpendicular to the length of the cable
S To prevent short-circuits, cut the cable with a sharp
instrument and be sure there are no whiskers on the
conductors.
2. Connecting the Cable
S Align the cable labels and cable colors, and place the
cable on the connector.
S The cover is translucent. Visually confirm that the cable
has been inserted all the way to the back.
3. Assembling the Connector
S Before assembling connectors, check that the cable is
inserted all way to the cable stopper and be sure that it
is securely connected.
S Grip the connector in the center with the crimp tool and
assemble the connector. When finished, confirm that the
connector has been properly assembled.
S Confirm that the locks on the housing are completely
caught on the hooks on the cover.
Pressure-welding
Pressure-weld the
connector until
there is no gap.
Pressure-welding
Before pressure-welding
After pressure-welding
Cover hook
Basic Specifications
Rated current 5 A
Rated voltage 25V DC
10000030663 Ver 00
Printed in USA