Rockwell Automation 1494F- 400A Disconnect Switch and Accessory Kits User Manual

Installation instructions

Installation Instructions

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from
contaminants.
The following procedures are critical to the proper operation of the disconnect handle and switch. Failure to follow these steps can result in damage to the equipment and / or serious
injury or death to the operator.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of
practice. In case of malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

Bulletin 1494F Disconnect Switch and Accessory Kits for Bulletins 502, 502L,
506, 512, 522, 1232X and 1494G

Disconnect Kit

Cat No.

Description

NEMA Starter

Size(s)

1494F-D400

400 Amp Switch

1494F-M2

1494F-S2

5
5

7-1/2" Painted Metal Handle

7-1/2" Stainless Steel Handle

1494F-FS400

400 Amp Fuse Block

1494F-MS400

400 Amp Mechanism

1495-N68

1494F-PH5

400 Amp Phase Barrier

Fuse Cover with Door

5
5
5
5

Fuse Clip, Class H, J, 400A - 250V, 400A - 600V

Fuse Clip, Class H, J, 200A-250V, 200A-600V

Fuse Clip, Class R, 200A-250V, 200A-600V
Fuse Clip, Class R, 400A-250V, 400A-600V

1401-N46
1401-N45
1401-N54
1401-N55

Lug Connector: Wire Size (2) #1/0 - 250 MCM

Lug Connector: Wire Size #4 ... 500 MCM

1494R-N14

1494R-N15

42052-105-01
DIR 42052-105 (Version 03) Publication 1494F-IN014C-EN-E - January 2013