Rockwell Automation 1606-XLS240E, -XLS240EA, -XLS240EC, -XLS240E-D Power Supply Reference Manual - Manual (Page 5)

All parameters are specified at 24V, 10A, 230Vac, 25°C ambient and after a 5 minutes run-in time, unless noted otherwise.
Rockwell Automation Publication 1606-RM044A-EN-P — March 2014 5
Bulletin 1606 Switched Mode Power Supplies
4. DC-Input
1606-XLS240E, 1606-XLS240EA, 1606-XLS240EC:
DC input nom. DC 110-150V -20%/+25%
DC input range min. 88-187Vdc continuous operation
DC input current typ. 2.37A 110Vdc, at 24V, 10A
1606-XLS240E-D:
DC input nom. DC 110-300V -20%/+25%
DC input range min. 88-375Vdc continuous operation
DC input current typ. 2.37/ 0.85A 110/300Vdc, at 24V, 10A
All units:
Allowed Voltage L/N to Earth max. 375Vdc continuous, IEC 62103
Turn-on voltage typ. 80Vdc steady state value
Shut-down voltage typ. 55Vdc steady state value
Fig. 4-1 Wiring for DC Input Instructions for DC use:
+
-
Load
L
PE
+
-
Power Supply
AC
Battery
N
DC
a) Use a battery or similar DC source.
For other sources, contact Rockwell Automation.
b) Connect +pole to L and –pole to N.
c) Connect the PE terminal to a earth wire or to the machine
ground.
d) A supply from the intermediate DC-bus of a frequency
converter is not recommended and can cause a
malfunction or damage the unit.