Barco R9010111 - Manual (Page 45)

11. D-Cine Premiere DP100 Info
11.3.1 Projector properties start up
How to start up
1. Push Properties. (image 11-8)
The properties window opens. (image 11-9)
Image 11-8
Projector properties selected Image 11-9
Properties window
11.3.2 IP addresses projector
Use the D-Cine Communicator software to setup the IP addresses.
IP
Internet Protocol. The network layer of TCP/IP. Required for communication with the internet.
Subnet mask
A number that is used to identify a subnetwork so that IP addresses can be shared on a local area network.
Default Gateway
A router that serves as an entry point into and exit point out of a network. For example, a local network (LAN) may
need a gateway to connect it to a wide area network (WAN) or to the Internet.
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage
centrally and automate the assignment of IP addresses in an organization’s network. Using the Internet Protocol, each
machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users
with a connection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address
must be entered manually at each computer and, if computers move to another location in another part of the network,
a new IP address must be entered. DHCP lets a network administrator supervise and distribute IP addresses from
a central point and automatically sends a new IP address when a computer is plugged into a different place in the
network.
Overview
1. Push IP Projector. (image 11-10)
R5976907 D-CINE PREMIERE DP100 02/11/2005 41