Barco R9010111 - Manual (Page 19)

5. Non-Cinema Operation
5. NON-CINEMA OPERATION
Overview
• ACSAR 2 Input facilities
• Monitoring ACSAR 2 selected Source
• Selecting an ACSAR 2 Source
• Remote Control Functionality
Introduction
This section explains how to display “alternative content” originating from a standard definition or high definition non-cinema source.
Such a source routes to a DVI (Digital Visual Interface) port in the D-Cine Premiere DP100 projector head, and bypass cinema
processing when selected.
ACSAR 2
Input 1 Input 2 Input 3 Input 4
Image 5-1
Location of the ACSAR 2
5.1 ACSAR 2 Input facilities
Input facilities
The ACSAR 2 can be filled up with a mixture of the following input modules (maximum 4):
Input module Order number
DVI input R9850960
HD-SDI input R9853130
RGB analog (up to UXGA) R9853120
SDI input R9850970
S-Video/Composite Video input R9850920
YUV/RGsB input R9850940
For further info about source connection to the input module, File service, Picture tuning, Window and Layout adjustment, refer to
the installation manual of the D-Cine Premiere DP100.
5.2 Monitoring ACSAR 2 selected Source
Monitoring
A monitor, connected to output “ACSAR 2 Preview” on the D-Cine Premiere DP100 input panel, displays in preview the image on
the output of the Alternative Content switcher.
R5976907 D-CINE PREMIERE DP100 02/11/2005 15