Rockwell Automation 1336S_F_T_E_R Power Module E/F/G/H Replacement - Manual

Instructions
This publication provides important information about replacement of
1336 Power Modules in E, F, G & H Frame drives. The material
presented supplements the information contained in the drive
Troubleshooting Guide (if available) – see below.
Frame
Size 1336 FORCE 1336 PLUS 1336 IMPACT
Drive Rating Guide No. Drive Rating Guide No. Drive Rating Guide No.
E B150-B250
C150-C250
CX300 1336 FORCE-6.14 B150-B250
C150-C250
CX300
1336 PLUS-6.4 B150-B250
C150-C250
CX300
Not Avail-
able at time
of printing
F BP300-BP450 – BP250-BP450 1336 PLUS-6.6 BP300-BP450
G B300-B600
BX250
C300-C650 1336 FORCE-6.15 B300-B600
BX250
C300-C600
1336 PLUS-6.5 B300-B600
C300-C650
H – – – – B700-B800
C700-C800
!
ATTENTION: This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. In addition the
supplied power modules are also ESD sensitive. Static
control precautions are required when installing, testing,
servicing or repairing this assembly. Component damage
may result if ESD control procedures are not followed. If
you are not familiar with static control procedures, reference
A-B publication 8000-4.5.2, “Guarding Against
Electrostatic Damage” or any other applicable ESD
protection handbook.
!
ATTENTION: A wrist-type grounding strap must be worn
when performing the following procedure. Failure to protect
drive components against ESD may cause damage to the
drive/components.
!
ATTENTION: To avoid a shock hazard, assure that all
power to the drive has been removed before proceeding. In
addition, verify that the DC bus has discharged by
measuring across the “+DC” and “–DC” terminals of TB1
with a voltmeter. The voltage should be 0.0VDC.
1336 PLUS, 1336 FORCE
™
& 1336 IMPACT
™
Power Module Replacement
Frames E, F, G & H
1336 FORCE & 1336 IMPACT are trademarks of Rockwell Automation.