Rockwell Automation MV SMC Flex OEM Components - Bypass Contactor Control Panel - Manual

MV SMC Flex OEM Components
Bypass Contactor Control Panel
Instruction Sheet
Handling
Carefully unpack the item and inspect it for damage that may have
occurred during shipping. Immediately report any damage to the
claims office of the carrier. Rockwell Automation will render
reasonable assistance in resolving a damage claim.
Identification
Verify the catalog number of the bypass contactor control panel.
Table 1 – Bypass Contactor Control Panel Options and Catalog Numbers
Control Voltage Contactor Type Catalog Number
Electrically Held – 400A 1503E-CE4D
110/120V AC – 50/60 Hz
Electrically Held – 800A 1503E-CE8D
Electrically Held – 400A 1503E-CE4E
220/230V AC – 50/50 Hz
Electrically Held – 800A 1503E-CE8E
Storage
If the control panel will not be installed immediately after receipt,
store it in a clean, dry and dust-free environment. Humidity should
not exceed 95%, non-condensing.
Installation
Refer to MV SMC Flex OEM Components – Bulletin 1503E,
Installation Instructions (Publication 1503E-IN001A-EN-P) for
complete installation instructions of the Bypass Contactor Control
Panel.
Additional Publications
Order additional copies of instruction manuals for all Allen-Bradley
medium voltage products from DOX Literature Fulfillment at
www.rockwellautomationdox.com.
Bypass Contactor
Control Panel
Bypass Contactor
Control Panel