Rockwell Automation 1585BP UTP Plug Installation Instructions - Manual (Page 2)

2
PN--26346
Printed in USA
The original dust
cover (1585BP--
MCAP) can be used
to insure proper
seating of plug.
11 12
While maintaining
pressure on plug or
keeping dust cap engaged,
tighten the flex nut to
0.5 N•m (5 in•lbs).
Place optional dust
cap (1585BP--MCAP)
chain over plug housing and
position between flex nut
and plug assembly as
shown. Tighten chain to
secure.
13
ATTENTION: To assist safe installation, comply
with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals
unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
IP67 rating can only be achieved when using
an IP67 rated enclosure with a properly assembled
industrial outlet or industrial plug cap.