Rockwell Automation 1414-CLMxxxxx_CLNxxxxx Low-limit Temperature Switch User Manual
Low-limit temperature switch
Publication 1414-IN009A-EN-P - October 2005
Installation Instructions
Low-limit Temperature Switch
Catalog Number(s) 1414-CLM20AHDAB,
1414-CLN20AHDAB
Install the Low-limit Temperature Switch
The switch can be mounted in any position. Avoid locations subject to excessive
vibration. On manual reset model, position control to permit convenient access to
the reset button . Use three mounting holes in rear of case for flush mounting to
duct or other flat surface. Install capillary element in horizontal serpentine pattern
across duct on downstream side of the coil so it is exposed to areas where low
temperatures will occur. Do not kink or apply excessive force to the capillary
element. Fasten capillary at sufficient points to prevent damage from air movement
or vibration.