Rockwell Automation 1336S Main Control Board Replacement - PLUS/IMPACT - Manual (Page 2)

2 1336 PLUS & 1336 IMPACT ™ AC Drive Main Control Board Replacement
8. Install the replacement Main Control Board. Re-assemble components in
reverse order. If a Control Interface Board (L option) is not being used,
verify that the jumpers are correctly inserted (see the drive User Manual for
details).
Important: If your drive is a 1336 IMPACT (Frames B-H), attach the
supplied label to the chassis in the area shown below.
Important: When replacing connectors, it is essential that correct
alignment is verified. Particular attention should be paid to
ribbon cable connectors. Misalignment of connectors could
result in damage to the drive.
!
ATTENTION: Replace any guards previously removed before
applying power to the drive. Failure to replace guards may result
in death or serious injury.
LANGUAGE MODU
LE
ALLEN-BRADLEY
LANGUAGE MODU
LE
ALLEN-BRADLEY
JOG
ESC
SEL
JOG
ESC
SEL
Frames A1 - A4 All Other Frames
Control Interface
(L Option) Board
Control Interface
(L Option) Board
Language Module
Jumpers
Language Module
DANGER !!
Risk of electric shock and death.
Disconnect power, wait 5 minutes and
verify DC bus voltage before servicing.
Follow instructions in manual before use.
Earth ground required.
1336 IMPACT Drives
Attach label to chassis
above Main Control Board
1336 IMPACT is a trademark of of Rockwell Automation, Inc.
Publication 1336 PLUS-5.67 – January, 2005 P/N 74103-909 (03)
Supersedes May, 1997 Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in USA.