Rockwell Automation 1336F PLUS II Fan Replacement - Frames B C - Manual (Page 2)

2 1336 PLUS II Fan Replacement Frames B & C
Figure 1 Fan Location
7. Using the supplied splice, join the fan leads together as follows:
a. Insert red wires in splice cover, overlapping ends slightly.
b. Close cover (keeping wires in position) and squeeze with pliers until
cover is locked.
c. Repeat for black wires.
8. Install fan connector. Apply supplied sealant to wires at the chassis hole.
9. Apply drive power and verify fan operation. Ensure that air is moving
towards the top of the drive.
Connector
Fan Leads
Fan
to Fan
Publication 1336F-IN012A-EN-P – October, 2003 P/N 320675 -P01
Copyright © 2003 Rockwell Automation. All rights reserved. Printed in USA.