Rockwell Automation 931S-A1A1N-IP1 Passive Isolator, 1 Channel - Manual (Page 9)

9
8 UL Class 1, Division 2 Markings
for selected Signal Conditioners
A. “This equipment is suitable for use in Class I, Division 2,
Groups A, B, C and D hazardous locations or non hazardous
locations only or the equivalent.”
B. “WARNING: EXPLOSION HAZARD - Substitution of
components may impair suitability for use in Class I, Division
2 environments.”
C. “WARNING: EXPLOSION HAZARD - The area must be
known to be non hazardous before servicing/replacing the
unit and before installing or removing I/O wiring.”
D. “WARNING: EXPLOSION HAZARD - Do Not disconnect
equipment unless power has been disconnected and the area
is known to be non hazardous.”
The warning references on this side have only validity for modules
with a UL Class I, Devision 2 permission.
WARNING