Rockwell Automation 931S-F1C2D-DC Frequency Converter - Manual (Page 10)

8 8
Special range
(frequency generator is required)
Switch 2
Operating mode 1 2 3 4
Special range 1 1 1 1
Special range
(frequency generator is required)
Switch 2
Operating mode 1 2 3 4
Save min.
frequency
0 1 1 1
3.6 Example 3
Input frequency: 20 kHz...50 kHz
Output: 4...20mA
Special range min. frequency
Special range
(frequency generator is required)
Switch 2
Operating mode 1 2 3 4
Save max.
frequency
1 0 1 1
Special range max. frequency
Selecting the special range
Selecting the output
Switch 2
Output 5 6 7 8
4…20 mA 0 1 0 0
ready
• Apply min. frequency to the module.
• Connect the module to the power
supply.
• The LED lights up when the min.
input frequency is measured. The
frequency has been saved when the
LED blinks; the module can be
disconnected from the power
supply.
• Apply max. frequency to the module.
• Connect the module to the power
supply.
• The LED lights up when the max.
input frequency is measured. The
frequency has been saved when the
LED blinks; the module can be
disconnected from the power
supply.