beautypg.com

Rockwell Automation 1494C-JK1_JK2 Cable Operated Disconnect Pin Replacement Kit User Manual

Cable operated disconnect pin replacement kit, 6attention

background image

2

Remove handle and mechanism bracket

1

Remove defeater bracket

Install defeater bracket

7

Install handle and mechanism bracket

30 - 40 lb-in

(30A - 200A)

60 - 80 lb-in

(400A - 600A)

3

Remove and discard
retaining ring

4

Remove and
discard old pin
and washer

5

Install new pin
and washer

6

Install new
retaining ring

8

7-11 lb-in

Cable Operated Disconnect Pin Replacement Kit

1494C-JK1 - (30A - 200A):1494C-CM1 thru CM8 / CMX1 thru CMX8

1494C-JK2 - (400A):1494C-CM9 thru CM12 / CMX9 thru CMX12

(600A):1494C-CM13 thru CM16 / CMX13 thru CMX16

WARNING

To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep
free from contaminants.

6

ATTENTION:

CHECK FOR PROPER OPERATION . Upon completion of the

pin replacement, if further adjustments are needed see instruction sheet(s)*
included with the pin replacement kit.
* 30A - 200A use 42052-151-01
* 400A use 42052-159-01
* 600A use 42052-191-01

During pin replacement, make sure both handle and disconnect switch are
either in the “ON” position or “OFF” position for ease of installation.

PN-81093
DIR 10000119196

(Version 00)

Printed in Mexico