Rockwell Automation 1336S_T_E DRIVE MTG GASKET - Manual

Installation Instructions
IN
Bulletin 1336–5.87 – November, 1997
Bulletin 1336 PLUS, 1336 IMPACT, and 1336
FORCE
TM
NEMA Type 4/12 Gasket Kit
Installation & Drive Mounting
(Catalog Number 1336–RF2 1336S–RF3
1336–RF4 1336–RF5
1336–RF6 1336–RF7)
The NEMA Type 4/12 Gasket Kit provides the information you need
to mount a Bulletin 1336 PLUS, 1336 IMPACT, or 1336 FORCE
drive in an enclosure with the heatsink extended outside the
enclosure. With the heatsink exposed to the ambient air, most of the
heat loss is dissipated into the ambient air instead of into the
enclosure.
The NEMA Type 4/12 Gasket Kit provides the following:
•
The materials to mount the drive, the gasket to the cabinet, and
the self tapping screws needed to mount the drive.
•
The information needed to lay out the cut out area and drill the
required mounting holes.
Important: You must use screws that have had a thread
sealant applied to prevent water leakage.
Self–tapping screws and the appropriate drilling
pattern are provided. If you choose to use
threaded screws, you must make sure that a
thread sealant has been applied to the screws and
follow the provided tapping pattern when
drilling the holes.
What This Option Provides