beautypg.com

Rockwell Automation 1492-PRINTCOLLECT ClearMark Printer - Ink Collector Unit Instruction Sheet User Manual

Bulletin 1492

background image

Replace the ink collector unit if the following
message is issued in the display:

1. Turn OFF the printer.
2. Remove the new ink collector unit from

the packaging. Use the included gloves.

3. Remove the full ink collector unit from

the printer.

Figure 1 - Replacing the ink collector unit

4. Place the full ink collector unit into the

provided bag and dispose.

5. Insert the new ink collector unit into the

printer.

6. Close the cover so that it snaps firmly into

place.

7. Turn ON the printer.
8. A message in the printer display requests

you to reset the internal counter or the
display continues to display the message:

9. Press the [Menu] key

10. Use the arrow keys to select System then

press the

[Enter] key.

11. Confirm the following display texts by

pressing the

[Enter] key:

12. Turn the printer OFF, then ON again.

CAUTION: If the ink comes into contact
with your eyes wash out immediately with
water. If the ink comes into contact with
your skin wash the affected area
thoroughly with soap and water. If you
swallow ink rinse your mouth and drink
plenty of water.

R e p l a c e I n k

C o l l e c t o r U n i t

R e p l a c e I n k

C o l l e c t o r U n i t

M e n u :

S y s t e m

S y s t e m :

I n k C U R e p l a c e

O v e r f l o w m a y

o c c u r i f U n i t i s

n o t r e p l a c e d .

R e s e t c o u n t e r s ?

R e s e t c o m p l e t e

P o w e r O f f / O n

Bulletin 1492

ClearMark Printer

Replacement Ink Collector Unit

Installation Instructions