Rockwell Automation 25B PowerFlex 520-Series EMC Cores User Manual

Page 2

PowerFlex 520-Series EMC Cores

Publication 520-IN012A-EN-P - July 2014

Allen-Bradley, Rockwell Software, Rockwell Automation, PowerFlex, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: [email protected]
Online:

http:// www.ab.com/support/abdrives

Recommended Placement of EMC Cores

Frame A

Frame B

Frame C

Frame D

Frame E

With optional EMC plate (25-EMC1-Fx)

Without EMC plate

CORE-xx-A-1

CORE-xx-A-2

CORE-xx-B-1

CORE-xx-B-2

CORE-xx-C-1

CORE-xx-C-2

CORE-xx-D-1

CORE-xx-D-2

CORE-E-1

CORE-E-2

CORE-E-3

CORE-E-4

Ground
cable

CORE-xx-x-1

CORE-xx-x-2

CORE-E-1

CORE-E-2

CORE-E-3

CORE-E-4

Ground
cable

Shows contact to
shielded layer

Secure EMC core by
using cable/zip ties

Input cable to drive (Shielded or Unshielded)

Output cable from drive (Shielded)

IMPORTANT

The ground cable/shield for both input and output must pass through the EMC core(s), except for the following:

• Frame E drives with internal filters where the grounded input cable must not pass through EMC CORE-E-1.
• 600V drives with external filters where the grounded output cable must not pass through the EMC core(s).

Recommended Placement of EMC Cores Relative to External Filter

Input core

Output core

Incoming power

EMC Filter

Drive

Motor

All Frame sizes

This manual is related to the following products:

25A PowerFlex 520-Series EMC Cores