Rockwell Automation 598-N3 Pad Mounting Foot Kit - Manual

42052-062-01 (2)
Printed in U.S.A.
PART
NO.
MATERIAL
CHG.
CHAR. SIZE
FLAT FOLD
-01 2
ONE SIDE PRINTED
8 1/2" W x 11" H
BODY STOCK WHITE
BODY INK BLACK
2-1/8" W x 2-3/4" H
Bulletin 598 Pad Mounting Foot Kit Installation Instructions
(Cat. No. 598-N3)
For use with Bulletin 1232X and 1233X NEMA Size 3 & 4 Pump Panels
1) Remove knockouts at Location A on the right side, left side and bottom of the enclosure.
2) Install mounting pad foot on the right side and left side of enclosure as shown below,
while the enclosure is lying on its back or on it's side, on a well supported, clean surface
preferably covered with a rubber liner or equivalent.
3) Install carriage bolt, flat washer, lock washer and nut as shown below. Tighten to specified
torque value.
Enclosure for Sizes 3 & 4 Pump Panels (50" x 22" x 10") requires (4) bolts per pad mounting foot.
NOTE: This pad mounting foot kit can also be used with other enclosures that may not have knockouts
for the carriage bolts. Using the mounting feet as a template, drill 7/16 dia. holes for the bolts.
Customer option to use either 4 or 6 bolts for each pad mounting foot.
ATTENTION: To prevent electrical shock, disconnect from power source before installing or
servicing. Install in suitable enclosure. Keep free from contaminants.
1 1
1 1002081
2 1005035
42052-062
OF
N/A
N/A
N/A
REVISION
AUTHORIZATION
DR.
CHKD.
APPD.
DATE
DATE
DATE
E - DOC
LOCATION: MILWAUKEE, WISCONSIN U.S.A.
B-vertical.ai
DWG.
SIZE
SHEET
B
1 2 3 4 5 6 7 8
A
B
C
D
E
F
G
H
REFERENCE
DIMENSIONS APPLY BEFORE
SURFACE TREATMENT
(DIMENSIONS IN INCHES)
TOLERANCES UNLESS
OTHERWISE SPECIFIED
.XX:
.XXX:
ANGLES:
42052
BULLETIN 598-N3
MOUNTING FOOT KIT
INSTALLATION INSTRUCTIONS
C. KACZYNSKI 4-4-03
1-13-04
1-13-04
M. JUTZ
J. KOZICZKOWSKI
THIS DRAWING IS THE PROPERTY OF
ROCKWELL AUTOMATION, INC.
OR ITS SUBSIDIARIES AND MAY NOT BE COPIED,
USED OR DISCLOSED FOR ANY PURPOSE
EXCEPT AS AUTHORIZED IN WRITING BY
ROCKWELL AUTOMATION, INC.
Torque Specification: 175-200 lb-in.
A
6"
USE 1/2" BOLTS
OR STUDS
4-7/8
7-11/16
1.00
3-7/16
6-5/8
25-3/8 (50 x 22)