Rockwell Automation 150 SMC-50 Soft Starter Safety Label Installation - Manual

SMC-50 Safety Label Installation Instructions
WARNING To prevent electrical shock, disconnect from power source before
installing or servicing. Install in a suitable enclosure. Keep free from
contaminants.
1
2
90°
1
2
DANGER
Hazardous voltage in motor
circuit even when solid state
controller is OFF.
Disconnect main power
before servicing motor
controller or associated
wiring.
DANGER
Hazardous voltage in motor
circuit even when solid state
controller is OFF.
Disconnect main power
before servicing motor
controller or associated
wiring.
DANGER
Hazardous voltage in motor
circuit even when solid state
controller is OFF.
Disconnect main power
before servicing motor
controller or associated
wiring.
REFERENCE USER MANUAL 150-UM011* FOR ADDITIONAL INFORMATION
cULus
FOR LINE CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 10,000 RMS SYMMETRICAL AMPERES, 600 VOLTS MAXIMUM.
FOR INSIDE THE DELTA CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 18,000 RMS SYMMETRICAL AMPERES, 600 VOLTS MAXIMUM.
IEC/EN 60947-4-2
FOR LINE CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 10,000 RMS SYMMETRICAL AMPERES, 690 VOLTS MAXIMUM.
FOR INSIDE THE DELTA CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 18,000 RMS SYMMETRICAL AMPERES, 600 VOLTS MAXIMUM.
PN-102209
DIR 10000155855 (Version 00)
Printed in U.S.A.