Rockwell Automation 20P PowerFlex DC Drive - Frame B Switching Power Supply Circuit Board - Manual (Page 10)

Publication 20P-IN006B-EN-P - December 2009
Supersedes 20P-IN006A-EN-P - March 2009
Copyright © 2009 Rockwell Automation. All rights reserved. Printed in USA.
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions
1S7A02
Step 5: Replace the
Protective Covers and
Documenting the Change 1. Replace the protective covers in the reverse order of removal as
described in Step 3: Remove the Protective Covers on page 3 .
2. Install DPI cable (if present).
3. Record the installation of the new Switching Power Supply board and
date of installation on the Field Installed Option label on the side of the
drive (as shown below).
Related Documentation Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature .
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives User Manual - PowerFlex Digital DC Drives 20P-UM001…