beautypg.com

Rockwell Automation 45CPD Analog Laser Sensor User Manual

Important: save these instructions for future use

background image

1

Installation Instructions

Bulletin 45CPD Analog Laser Sensor

IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.

Description

The 45CPD sensor is a Class 1 infrared laser sensor that provides
long distance sensing with both analog and discrete outputs. It is
set up using the Teach-In buttons on the top of the sensor and
can be programmed for several modes depending on the
application: object detection (single or dual output), object
position (analog output), object detection (background
suppression), or object detection (reflector mode).

This sensor utilizes the time of flight principle and has a relatively
small beam spot for applications typical for this sensing range (up
to 6 m). The sensor is completely self contained in an IP67
enclosure and does not require any external control devices
which add cost and require additional mounting space.

For convenience purposes, the 45CPD utilizes a visible red Class 2
laser for alignment purposes during the set up of the sensor in an
application. The Class 2 laser is automatically shut down when the
sensor is placed in normal operation and the Class 1 “eye safe”
laser is used.

The 45CPD can be easily set up by mounting the sensor such that
the target is within the operating range of the sensor, and
teaching in the appropriate set points required for the
application. The sensor can be set with any combination of 1 or 2
discrete PNP outputs and 4…20 mA analog output. The discrete
outputs can be set for Light Operate (L.O.) or Dark Operate (D.O.)
and the analog output is automatically scaled between the
taught set points with either a positive or negative slope.

The 45CPD is an excellent solution for long range detection and
measurement applications including: distance measurement,
verifying material position, stack level, thickness measurement,
roll diameter, web winding/unwinding, positioning fixtures, error
proofing, inspection, long standoff distance (hot or limited space),
level monitoring, and box width measurement.

Features

• Eye Safe Class 1 laser for operation
• Visible red Class 2 laser for set-up
• Six meter sensing range
• Two discrete outputs (PNP) and analog output (4…20 mA)
• Easy set-up using teach-in buttons
• IP67 enclosure
• Self-contained sensor

Specifications

Sensing Beam Class 1 laser, IR 905 nm

Alignment Beam Visible red Class 2 laser, 650 nm

Spot Size 4 x 7 mm @ 2 m

(0.16 x 0.27 in. @ 6.56 ft)
4 x 12 mm @ 6 m
(0.16 x 0.47 in. @ 19.7 ft)

Sensing Range 0.20…6 m (0.7…19.78 ft)

Linearity

40 mm (1.57 in)

Repeatability Fast/slow:

15 mm/10 mm

(

0.6 in./0.4 in.)

Hysteresis 30 mm (1.2 in.) (fixed)

Temperature Drift 1.2 mm/°C

Supply Voltage 18…30V DC

Current Consumption

125 mA @ 24V DC

Circuitry Protection Short circuit, overload, false

pulse, transient noise, reverse
polarity protection

Output Type Two discrete PNP (L.O./D.O)

Analog Current 4…20 mA

Output Rating 100 mA max. for discrete outputs;

500

 max. impedance for

analog output

Response Time Fast/slow: 13 ms/30 ms

Housing Material Plastic—ABS

Lens Material PMMA

LED Indicators Green: Power; Yellow: (2) Q

A

, Q

B

ouput; Orange: speed mode; Red:
(4) Teach-in indication

Connection Types 5-pin DC micro

Supplied Accessories None

Optional Accessories Cordsets, mounting bracket

Operating Environment IP67

Vibration 10…55 Hz, 1.5 mm amplitude; 3

planes; meets or exceeds IEC
60947-5-2

Shock 30 g; 11 ms; meets or exceeds

60947-5-2

Operating Temperature

C (F) -20…+60° (-4…140°)

Approvals UL, cULus and CE marked for all

applicable directives