beautypg.com

Rockwell Automation 20P PowerFlex DC Drive - Frame D SCR Module Leg Assembly User Manual

Rockwell Automation Equipment

background image

Publication 20P-IN054A-EN-P

PowerFlex® DC Drive
Frame D SCR Module Leg Assembly
Installation Instructions

What This Kit Includes

Three SCR module leg assemblies

Three (for non-regenerative drives) or six (for regenerative drives) gate lead
cable sets

Static strap

Tools That You Need

Flathead screwdriver

Hexalobular screwdrivers

Torque wrenches

What You Need to Do

To install the SCR module leg assemblies:

❐ Step 1: Remove power from the drive

❐ Step 2: Remove the protective cover and open the control panel

❐ Step 3: Remove the existing SCR module leg assemblies

❐ Step 4: Install the new SCR module leg assemblies

❐ Step 5: Close the control panel, install the protective cover and document

the change

ATTENTION: Only qualified personnel familiar with DC drives
and associated machinery should plan or implement the installation,
start-up and subsequent maintenance of the system. Failure to comply
may result in personal injury and/or equipment damage.

ATTENTION: To avoid an electric shock hazard, ensure that all
power to the drive has been removed before performing the following.